The study of wood as a renewable material and organic material is what is known as wood science. In other words, the term wood science can also be known as wood technology. Wood is treated as a material in direct comparison with other products. The comparison made against other products will include the features of the material against those of wood, the value and the ease it can be worked on. The utilization of technology gives wood an upper hand in most of this comparison. The wide range of products where wood can be used is just one of the many advantages that give wood an upper hand over other products. Wood is renewable, and this makes it more precious. The other merit is that a part of the harvested material is at the same time used as energy to produce the product.
The good appearance of your timber made structure cannot be guaranteed if protection of the timber is not done. Wooden structures have to be kept away from water and pests that eat through the wood. The rotting and decay of the timber products are caused by the moisture and the insects. Alkaline copper Quaternary or the ACQ has turned out to be a very effective way wood preservation. This is a copper-based preservative that is applied to the wood for protection. As effective as this preservative, it has some downside to its use. The chemical is highly corrosive to most metals, the chemical corrodes away galvanized fasteners and therefore only stainless steel is used. The saturation level of any treatment will depend on where the wood is going to be used and the species of the wood. Timber being used around a water body will be dipped in a more saturated fluid than that being used above ground.
Many methods are being invented to protect the wood, and one of them is the copper metal method. This method, unlike the ACQ, is friendly to the metal fasteners and its gaining popularity very fast. Micronized copper wood preservative is the correct term to refer this type of preservation. The copper metal is applied to the wood as small microscopic particles injected into the wood at high pressure. The process eliminates the need to dissolve the copper as is done in earlier copper-based preservatives. This process is highly effective and the wood properties and heightened. The timber treated in this way is used in both outdoor and indoor frames that last very long.
Termites cannot eat through timber treated through this method. It is not corrosive to metals used in together with the product. The wood treated using this method last longer and is stronger.